OV - K-Means scalability acfl-O3-all 100000000 - Loop 25

0x2120 LDRSW	X11, [X8], #4    [3]

0x2124 LDUR	D0, [X9, #504]    [1]

0x2128 SUBS	W10, W10, #1

0x212c LDR	D1, [X24, X11,LSL #3]    [5]

0x2130 LDR	W12, [X20, X11,LSL #2]    [2]

0x2134 FADD	D0, D1, D0

0x2138 LDR	D1, [X22, X11,LSL #3]    [4]

0x213c ADD	W12, W12, #1

0x2140 STR	W12, [X20, X11,LSL #2]    [2]

0x2144 STR	D0, [X24, X11,LSL #3]    [5]

0x2148 LDR	D0, [X9], #16    [1]

0x214c FADD	D0, D1, D0

0x2150 STR	D0, [X22, X11,LSL #3]    [4]

0x2154 B.NE	2120

/home/fmusial/KMEANS_Benchmarks/kmeans/main.cpp: 139 - 143

--------------------------------------------------------------------------------

139:         for (int i = 0; i < n; ++i) {

140:             int cid = assignment[i];

141:             count[cid] += 1;

142:             sum_x[cid] += points[i].x;

143:             sum_y[cid] += points[i].y;

Coverage (%)	Name	Source Location	Module
○100.00	__kmp_invoke_microtask		libomp.so

Coverage (%)	Name	Source Location	Module
○100.00	__kmp_invoke_microtask		libomp.so

Coverage (%)	Name	Source Location	Module
○100.00	__kmp_invoke_microtask		libomp.so

Coverage (%)	Name	Source Location	Module
○100.00	__kmp_invoke_microtask		libomp.so

Coverage (%)	Name	Source Location	Module
○100.00	__kmp_invoke_microtask		libomp.so

Coverage (%)	Name	Source Location	Module
○100.00	__kmp_invoke_microtask		libomp.so

Coverage (%)	Name	Source Location	Module
○100.00	__kmp_invoke_microtask		libomp.so

min	med	avg	max

Percentile Index	10	20	30	40	50	60	70	80	90	100
Value

min	med	avg	max

Percentile Index	10	20	30	40	50	60	70	80	90	100
Value

Path /

Metric	Value
CQA speedup if no scalar integer	1.58
CQA speedup if FP arith vectorized	1.12
CQA speedup if fully vectorized	4.90
CQA speedup if no inter-iteration dependency	NA
CQA speedup if next bottleneck killed	1.06
Bottlenecks	P10,
Function	k_means(int, point_t, point_t, int*, int, int) [clone .omp_outlined.3]
Source	main.cpp:139-143
Source loop unroll info	not unrolled or unrolled with no peel/tail loop
Source loop unroll confidence level	max
Unroll/vectorization loop type	NA
Unroll factor	NA
CQA cycles	3.17
CQA cycles if no scalar integer	2.00
CQA cycles if FP arith vectorized	2.83
CQA cycles if fully vectorized	0.65
Front-end cycles	1.75
P0 cycles	0.50
P1 cycles	0.50
P2 cycles	1.00
P3 cycles	1.00
P4 cycles	1.00
P5 cycles	1.00
P6 cycles	1.00
P7 cycles	1.00
P8 cycles	1.00
P9 cycles	1.00
P10 cycles	3.17
P11 cycles	2.83
P12 cycles	3.00
P13 cycles	0.50
P14 cycles	0.50
DIV/SQRT cycles	0.00
Inter-iter dependencies cycles	1
FE+BE cycles (UFS)	NA
Stall cycles (UFS)	NA
Nb insns	14.00
Nb uops	14.00
Nb loads	NA
Nb stores	3.00
Nb stack references	0.00
FLOP/cycle	0.63
Nb FLOP add-sub	2.00
Nb FLOP mul	0.00
Nb FLOP fma	0.00
Nb FLOP div	0.00
Nb FLOP rcp	0.00
Nb FLOP sqrt	0.00
Nb FLOP rsqrt	0.00
Bytes/cycle	18.95
Bytes prefetched	0.00
Bytes loaded	40.00
Bytes stored	20.00
Stride 0	2.00
Stride 1	0.00
Stride n	0.00
Stride unknown	0.00
Stride indirect	3.00
Vectorization ratio all	0.00
Vectorization ratio load	0.00
Vectorization ratio store	0.00
Vectorization ratio mul	NA
Vectorization ratio add_sub	0.00
Vectorization ratio fma	NA
Vectorization ratio div_sqrt	NA
Vectorization ratio other	NA
Vector-efficiency ratio all	20.83
Vector-efficiency ratio load	22.50
Vector-efficiency ratio store	20.83
Vector-efficiency ratio mul	NA
Vector-efficiency ratio add_sub	18.75
Vector-efficiency ratio fma	NA
Vector-efficiency ratio div_sqrt	NA
Vector-efficiency ratio other	NA

Metric	Value
CQA speedup if no scalar integer	1.58
CQA speedup if FP arith vectorized	1.12
CQA speedup if fully vectorized	4.90
CQA speedup if no inter-iteration dependency	NA
CQA speedup if next bottleneck killed	1.06
Bottlenecks	P10,
Function	k_means(int, point_t, point_t, int*, int, int) [clone .omp_outlined.3]
Source	main.cpp:139-143
Source loop unroll info	not unrolled or unrolled with no peel/tail loop
Source loop unroll confidence level	max
Unroll/vectorization loop type	NA
Unroll factor	NA
CQA cycles	3.17
CQA cycles if no scalar integer	2.00
CQA cycles if FP arith vectorized	2.83
CQA cycles if fully vectorized	0.65
Front-end cycles	1.75
P0 cycles	0.50
P1 cycles	0.50
P2 cycles	1.00
P3 cycles	1.00
P4 cycles	1.00
P5 cycles	1.00
P6 cycles	1.00
P7 cycles	1.00
P8 cycles	1.00
P9 cycles	1.00
P10 cycles	3.17
P11 cycles	2.83
P12 cycles	3.00
P13 cycles	0.50
P14 cycles	0.50
DIV/SQRT cycles	0.00
Inter-iter dependencies cycles	1
FE+BE cycles (UFS)	NA
Stall cycles (UFS)	NA
Nb insns	14.00
Nb uops	14.00
Nb loads	NA
Nb stores	3.00
Nb stack references	0.00
FLOP/cycle	0.63
Nb FLOP add-sub	2.00
Nb FLOP mul	0.00
Nb FLOP fma	0.00
Nb FLOP div	0.00
Nb FLOP rcp	0.00
Nb FLOP sqrt	0.00
Nb FLOP rsqrt	0.00
Bytes/cycle	18.95
Bytes prefetched	0.00
Bytes loaded	40.00
Bytes stored	20.00
Stride 0	2.00
Stride 1	0.00
Stride n	0.00
Stride unknown	0.00
Stride indirect	3.00
Vectorization ratio all	0.00
Vectorization ratio load	0.00
Vectorization ratio store	0.00
Vectorization ratio mul	NA
Vectorization ratio add_sub	0.00
Vectorization ratio fma	NA
Vectorization ratio div_sqrt	NA
Vectorization ratio other	NA
Vector-efficiency ratio all	20.83
Vector-efficiency ratio load	22.50
Vector-efficiency ratio store	20.83
Vector-efficiency ratio mul	NA
Vector-efficiency ratio add_sub	18.75
Vector-efficiency ratio fma	NA
Vector-efficiency ratio div_sqrt	NA
Vector-efficiency ratio other	NA

Path /

Average path: Display a virtual path defined by average values of all real paths

Function	k_means(int, point_t, point_t, int*, int, int) [clone .omp_outlined.3]
Source file and lines	main.cpp:139-143
Module	kmeans-acfl-O3-all

The loop is defined in /home/fmusial/KMEANS_Benchmarks/kmeans/main.cpp:139-143.

The related source loop is not unrolled or unrolled with no peel/tail loop.

gain
potential
hint
expert

Code clean check

Detected a slowdown caused by scalar integer instructions (typically used for address computation). By removing them, you can lower the cost of an iteration from 3.17 to 2.00 cycles (1.58x speedup).

Workaround

Try to reorganize arrays of structures to structures of arrays
Consider to permute loops (see vectorization gain report)

Vectorization

Your loop is not vectorized. Only 20% of vector register length is used (average across all VPU instructions). By vectorizing your loop, you can lower the cost of an iteration from 3.17 to 0.65 cycles (4.90x speedup).

Details

All VPU instructions are used in scalar version (process only one data element in vector registers). Since your execution units are vector units, only a vectorized loop can use their full power.

Workaround

Try another compiler or update/tune your current one
Remove inter-iterations dependences from your loop and make it unit-stride:
- If your arrays have 2 or more dimensions, check whether elements are accessed contiguously and, otherwise, try to permute loops accordingly: C storage order is row-major: for(i) for(j) a[j][i] = b[j][i]; (slow, non stride 1) => for(i) for(j) a[i][j] = b[i][j]; (fast, stride 1)
- If your loop streams arrays of structures (AoS), try to use structures of arrays instead (SoA): for(i) a[i].x = b[i].x; (slow, non stride 1) => for(i) a.x[i] = b.x[i]; (fast, stride 1)

No data for this section

Slow data structures access

Detected data structures (typically arrays) that cannot be efficiently read/written

Details

Irregular (variable stride) or indirect: 3 occurrence(s)

Non-unit stride (uncontiguous) accesses are not efficiently using data caches

Workaround

Try to remove indirect accesses. If applicable, precompute elements out of the innermost loop.

Matching between your loop (in the source code) and the binary loop

The binary loop is composed of 2 FP arithmetical operations:

2: addition or subtraction

The binary loop is loading 40 bytes. The binary loop is storing 20 bytes.

Arithmetic intensity

Arithmetic intensity is 0.03 FP operations per loaded or stored byte.

General properties

nb instructions	14
nb uops	14
loop length	56
used w registers	2
used x registers	6
used b registers	0
used h registers	0
used s registers	0
used d registers	2
used q registers	0
used v registers	0
used z registers	0
nb stack references	0

Front-end

MACRO FUSION NOT POSSIBLE FIT IN UOP CACHE

micro-operation queue	1.75 cycles
front end	1.75 cycles

Back-end

	P0	P1	P2	P3	P4	P5	P6	P7	P8	P9	P10	P11	P12	P13	P14
uops	0.50	0.50	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	3.17	2.83	3.00	0.50	0.50
cycles	0.50	0.50	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	3.17	2.83	3.00	0.50	0.50

Execution ports to units layout:

P0: BRU
P1: BRU
P2: ALU
P3: ALU
P4: ALU
P5: ALU
P6 (128 bits): VPU, FP store data, ALU, DIV/SQRT
P7 (128 bits): VPU, ALU, FP store data
P8 (128 bits): VPU, ALU, DIV/SQRT
P9 (128 bits): ALU, VPU
P10 (256 bits): store address, load
P11 (256 bits): store address, load
P12 (256 bits): load
P13 (64 bits): store data
P14 (64 bits): store data

Cycles executing div or sqrt instructions	NA
Longest recurrence chain latency (RecMII)	1.00

Cycles summary

Front-end	1.75
Dispatch	3.17
Data deps.	1.00
Overall L1	3.17

Vectorization ratios

INT

all	0%
load	0%
store	0%
mul	NA (no mul vectorizable/vectorized instructions)
add-sub	0%
fma	NA (no fma vectorizable/vectorized instructions)
other	NA (no other vectorizable/vectorized instructions)

FP

all	0%
load	NA (no load vectorizable/vectorized instructions)
store	NA (no store vectorizable/vectorized instructions)
mul	NA (no mul vectorizable/vectorized instructions)
add-sub	0%
fma	NA (no fma vectorizable/vectorized instructions)
div/sqrt	NA (no div/sqrt vectorizable/vectorized instructions)
other	NA (no other vectorizable/vectorized instructions)

INT+FP

all	0%
load	0%
store	0%
mul	NA (no mul vectorizable/vectorized instructions)
add-sub	0%
fma	NA (no fma vectorizable/vectorized instructions)
div/sqrt	NA (no div/sqrt vectorizable/vectorized instructions)
other	NA (no other vectorizable/vectorized instructions)

Vector efficiency ratios

INT

all	20%
load	22%
store	20%
mul	NA (no mul vectorizable/vectorized instructions)
add-sub	12%
fma	NA (no fma vectorizable/vectorized instructions)
other	NA (no other vectorizable/vectorized instructions)

FP

all	25%
load	NA (no load vectorizable/vectorized instructions)
store	NA (no store vectorizable/vectorized instructions)
mul	NA (no mul vectorizable/vectorized instructions)
add-sub	25%
fma	NA (no fma vectorizable/vectorized instructions)
div/sqrt	NA (no div/sqrt vectorizable/vectorized instructions)
other	NA (no other vectorizable/vectorized instructions)

INT+FP

all	20%
load	22%
store	20%
mul	NA (no mul vectorizable/vectorized instructions)
add-sub	18%
fma	NA (no fma vectorizable/vectorized instructions)
div/sqrt	NA (no div/sqrt vectorizable/vectorized instructions)
other	NA (no other vectorizable/vectorized instructions)

Cycles and memory resources usage

Assuming all data fit into the L1 cache, each iteration of the binary loop takes 3.17 cycles. At this rate:

13% of peak load performance is reached (12.63 out of 96.00 bytes loaded per cycle (GB/s @ 1GHz))
13% of peak store performance is reached (6.32 out of 48.00 bytes stored per cycle (GB/s @ 1GHz))

Front-end bottlenecks

Found no such bottlenecks.

ASM code

In the binary file, the address of the loop is: 2120

Instruction	Nb FU	P0	P1	P2	P3	P4	P5	P6	P7	P8	P9	P10	P11	P12	P13	P14	Latency	Recip. throughput	Vectorization
LDRSW X11, [X8], #4	1	0	0	0.25	0.25	0.25	0.25	0	0	0	0	0.33	0.33	0.33	0	0	4	0.33	N/A
LDUR D0, [X9, #504]	1	0	0	0	0	0	0	0	0	0	0	0.33	0.33	0.33	0	0	6	0.33	scal (25.0%)
SUBS W10, W10, #1	1	0	0	0.25	0.25	0.25	0.25	0	0	0	0	0	0	0	0	0	1	0.33	scal (12.5%)
LDR D1, [X24, X11,LSL #3]	1	0	0	0	0	0	0	0	0	0	0	0.33	0.33	0.33	0	0	6	0.33	scal (25.0%)
LDR W12, [X20, X11,LSL #2]	1	0	0	0	0	0	0	0	0	0	0	0.33	0.33	0.33	0	0	4	0.33	scal (12.5%)
FADD D0, D1, D0	1	0	0	0	0	0	0	0.25	0.25	0.25	0.25	0	0	0	0	0	2	0.25	scal (25.0%)
LDR D1, [X22, X11,LSL #3]	1	0	0	0	0	0	0	0	0	0	0	0.33	0.33	0.33	0	0	6	0.33	scal (25.0%)
ADD W12, W12, #1	1	0	0	0.25	0.25	0.25	0.25	0	0	0	0	0	0	0	0	0	1	0.25	scal (12.5%)
STR W12, [X20, X11,LSL #2]	1	0	0	0	0	0	0	0	0	0	0	0.50	0.50	0	0.50	0.50	1	0.50	scal (12.5%)
STR D0, [X24, X11,LSL #3]	1	0	0	0	0	0	0	0.50	0.50	0	0	0.50	0.50	0	0	0	2	0.50	scal (25.0%)
LDR D0, [X9], #16	1	0	0	0.25	0.25	0.25	0.25	0	0	0	0	0.33	0.33	0.33	0	0	6	0.33	scal (25.0%)
FADD D0, D1, D0	1	0	0	0	0	0	0	0.25	0.25	0.25	0.25	0	0	0	0	0	2	0.25	scal (25.0%)
STR D0, [X22, X11,LSL #3]	1	0	0	0	0	0	0	0.50	0.50	0	0	0.50	0.50	0	0	0	2	0.50	scal (25.0%)
B.NE 2120 <_Z7k_meansiP7point_tS0_Piii.omp_outlined.3+0x1ac>	1	0.50	0.50	0	0	0	0	0	0	0	0	0	0	0	0	0	1	0.50	N/A

Function	k_means(int, point_t, point_t, int*, int, int) [clone .omp_outlined.3]
Source file and lines	main.cpp:139-143
Module	kmeans-acfl-O3-all

The loop is defined in /home/fmusial/KMEANS_Benchmarks/kmeans/main.cpp:139-143.

The related source loop is not unrolled or unrolled with no peel/tail loop.

gain
potential
hint
expert

Code clean check

Detected a slowdown caused by scalar integer instructions (typically used for address computation). By removing them, you can lower the cost of an iteration from 3.17 to 2.00 cycles (1.58x speedup).

Workaround

Try to reorganize arrays of structures to structures of arrays
Consider to permute loops (see vectorization gain report)

Vectorization

Your loop is not vectorized. Only 20% of vector register length is used (average across all VPU instructions). By vectorizing your loop, you can lower the cost of an iteration from 3.17 to 0.65 cycles (4.90x speedup).

Details

All VPU instructions are used in scalar version (process only one data element in vector registers). Since your execution units are vector units, only a vectorized loop can use their full power.

Workaround

Try another compiler or update/tune your current one
Remove inter-iterations dependences from your loop and make it unit-stride:
- If your arrays have 2 or more dimensions, check whether elements are accessed contiguously and, otherwise, try to permute loops accordingly: C storage order is row-major: for(i) for(j) a[j][i] = b[j][i]; (slow, non stride 1) => for(i) for(j) a[i][j] = b[i][j]; (fast, stride 1)
- If your loop streams arrays of structures (AoS), try to use structures of arrays instead (SoA): for(i) a[i].x = b[i].x; (slow, non stride 1) => for(i) a.x[i] = b.x[i]; (fast, stride 1)

No data for this section

Slow data structures access

Detected data structures (typically arrays) that cannot be efficiently read/written

Details

Irregular (variable stride) or indirect: 3 occurrence(s)

Non-unit stride (uncontiguous) accesses are not efficiently using data caches

Workaround

Try to remove indirect accesses. If applicable, precompute elements out of the innermost loop.

Matching between your loop (in the source code) and the binary loop

The binary loop is composed of 2 FP arithmetical operations:

2: addition or subtraction

The binary loop is loading 40 bytes. The binary loop is storing 20 bytes.

Arithmetic intensity

Arithmetic intensity is 0.03 FP operations per loaded or stored byte.

General properties

nb instructions	14
nb uops	14
loop length	56
used w registers	2
used x registers	6
used b registers	0
used h registers	0
used s registers	0
used d registers	2
used q registers	0
used v registers	0
used z registers	0
nb stack references	0

Front-end

MACRO FUSION NOT POSSIBLE FIT IN UOP CACHE

micro-operation queue	1.75 cycles
front end	1.75 cycles

Back-end

	P0	P1	P2	P3	P4	P5	P6	P7	P8	P9	P10	P11	P12	P13	P14
uops	0.50	0.50	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	3.17	2.83	3.00	0.50	0.50
cycles	0.50	0.50	1.00	1.00	1.00	1.00	1.00	1.00	1.00	1.00	3.17	2.83	3.00	0.50	0.50

Execution ports to units layout:

P0: BRU
P1: BRU
P2: ALU
P3: ALU
P4: ALU
P5: ALU
P6 (128 bits): VPU, FP store data, ALU, DIV/SQRT
P7 (128 bits): VPU, ALU, FP store data
P8 (128 bits): VPU, ALU, DIV/SQRT
P9 (128 bits): ALU, VPU
P10 (256 bits): store address, load
P11 (256 bits): store address, load
P12 (256 bits): load
P13 (64 bits): store data
P14 (64 bits): store data

Cycles executing div or sqrt instructions	NA
Longest recurrence chain latency (RecMII)	1.00

Cycles summary

Front-end	1.75
Dispatch	3.17
Data deps.	1.00
Overall L1	3.17

Vectorization ratios

INT

all	0%
load	0%
store	0%
mul	NA (no mul vectorizable/vectorized instructions)
add-sub	0%
fma	NA (no fma vectorizable/vectorized instructions)
other	NA (no other vectorizable/vectorized instructions)

FP

all	0%
load	NA (no load vectorizable/vectorized instructions)
store	NA (no store vectorizable/vectorized instructions)
mul	NA (no mul vectorizable/vectorized instructions)
add-sub	0%
fma	NA (no fma vectorizable/vectorized instructions)
div/sqrt	NA (no div/sqrt vectorizable/vectorized instructions)
other	NA (no other vectorizable/vectorized instructions)

INT+FP

all	0%
load	0%
store	0%
mul	NA (no mul vectorizable/vectorized instructions)
add-sub	0%
fma	NA (no fma vectorizable/vectorized instructions)
div/sqrt	NA (no div/sqrt vectorizable/vectorized instructions)
other	NA (no other vectorizable/vectorized instructions)

Vector efficiency ratios

INT

all	20%
load	22%
store	20%
mul	NA (no mul vectorizable/vectorized instructions)
add-sub	12%
fma	NA (no fma vectorizable/vectorized instructions)
other	NA (no other vectorizable/vectorized instructions)

FP

all	25%
load	NA (no load vectorizable/vectorized instructions)
store	NA (no store vectorizable/vectorized instructions)
mul	NA (no mul vectorizable/vectorized instructions)
add-sub	25%
fma	NA (no fma vectorizable/vectorized instructions)
div/sqrt	NA (no div/sqrt vectorizable/vectorized instructions)
other	NA (no other vectorizable/vectorized instructions)

INT+FP

all	20%
load	22%
store	20%
mul	NA (no mul vectorizable/vectorized instructions)
add-sub	18%
fma	NA (no fma vectorizable/vectorized instructions)
div/sqrt	NA (no div/sqrt vectorizable/vectorized instructions)
other	NA (no other vectorizable/vectorized instructions)

Cycles and memory resources usage

Assuming all data fit into the L1 cache, each iteration of the binary loop takes 3.17 cycles. At this rate:

13% of peak load performance is reached (12.63 out of 96.00 bytes loaded per cycle (GB/s @ 1GHz))
13% of peak store performance is reached (6.32 out of 48.00 bytes stored per cycle (GB/s @ 1GHz))

Front-end bottlenecks

Found no such bottlenecks.

ASM code

In the binary file, the address of the loop is: 2120

Instruction	Nb FU	P0	P1	P2	P3	P4	P5	P6	P7	P8	P9	P10	P11	P12	P13	P14	Latency	Recip. throughput	Vectorization
LDRSW X11, [X8], #4	1	0	0	0.25	0.25	0.25	0.25	0	0	0	0	0.33	0.33	0.33	0	0	4	0.33	N/A
LDUR D0, [X9, #504]	1	0	0	0	0	0	0	0	0	0	0	0.33	0.33	0.33	0	0	6	0.33	scal (25.0%)
SUBS W10, W10, #1	1	0	0	0.25	0.25	0.25	0.25	0	0	0	0	0	0	0	0	0	1	0.33	scal (12.5%)
LDR D1, [X24, X11,LSL #3]	1	0	0	0	0	0	0	0	0	0	0	0.33	0.33	0.33	0	0	6	0.33	scal (25.0%)
LDR W12, [X20, X11,LSL #2]	1	0	0	0	0	0	0	0	0	0	0	0.33	0.33	0.33	0	0	4	0.33	scal (12.5%)
FADD D0, D1, D0	1	0	0	0	0	0	0	0.25	0.25	0.25	0.25	0	0	0	0	0	2	0.25	scal (25.0%)
LDR D1, [X22, X11,LSL #3]	1	0	0	0	0	0	0	0	0	0	0	0.33	0.33	0.33	0	0	6	0.33	scal (25.0%)
ADD W12, W12, #1	1	0	0	0.25	0.25	0.25	0.25	0	0	0	0	0	0	0	0	0	1	0.25	scal (12.5%)
STR W12, [X20, X11,LSL #2]	1	0	0	0	0	0	0	0	0	0	0	0.50	0.50	0	0.50	0.50	1	0.50	scal (12.5%)
STR D0, [X24, X11,LSL #3]	1	0	0	0	0	0	0	0.50	0.50	0	0	0.50	0.50	0	0	0	2	0.50	scal (25.0%)
LDR D0, [X9], #16	1	0	0	0.25	0.25	0.25	0.25	0	0	0	0	0.33	0.33	0.33	0	0	6	0.33	scal (25.0%)
FADD D0, D1, D0	1	0	0	0	0	0	0	0.25	0.25	0.25	0.25	0	0	0	0	0	2	0.25	scal (25.0%)
STR D0, [X22, X11,LSL #3]	1	0	0	0	0	0	0	0.50	0.50	0	0	0.50	0.50	0	0	0	2	0.50	scal (25.0%)
B.NE 2120 <_Z7k_meansiP7point_tS0_Piii.omp_outlined.3+0x1ac>	1	0.50	0.50	0	0	0	0	0	0	0	0	0	0	0	0	0	1	0.50	N/A

▶Scalability Runs Description

Run run_1_thread	Number processes: 1Number nodes: 1Run Command: <executable> kmeans/input/100000000.in 1000 100000000 50 25MPI Command: Dataset: Run Directory: /home/fmusial/KMEANS_BenchmarksOMP_PROC_BIND: closeOMP_NUM_THREADS: 1OMP_PLACES: cores
Run run_2_threads	Number processes: 1Number nodes: 1Run Command: <executable> kmeans/input/100000000.in 1000 100000000 50 25MPI Command: Dataset: Run Directory: /home/fmusial/KMEANS_BenchmarksOMP_PLACES: coresOMP_PROC_BIND: closeOMP_NUM_THREADS: 2
Run run_4_threads	Number processes: 1Number nodes: 1Run Command: <executable> kmeans/input/100000000.in 1000 100000000 50 25MPI Command: Dataset: Run Directory: /home/fmusial/KMEANS_BenchmarksOMP_PLACES: coresOMP_PROC_BIND: closeOMP_NUM_THREADS: 4
Run run_8_threads	Number processes: 1Number nodes: 1Run Command: <executable> kmeans/input/100000000.in 1000 100000000 50 25MPI Command: Dataset: Run Directory: /home/fmusial/KMEANS_BenchmarksOMP_PLACES: coresOMP_PROC_BIND: closeOMP_NUM_THREADS: 8
Run run_16_threads	Number processes: 1Number nodes: 1Run Command: <executable> kmeans/input/100000000.in 1000 100000000 50 25MPI Command: Dataset: Run Directory: /home/fmusial/KMEANS_BenchmarksOMP_PLACES: coresOMP_PROC_BIND: closeOMP_NUM_THREADS: 16
Run run_32_threads	Number processes: 1Number nodes: 1Run Command: <executable> kmeans/input/100000000.in 1000 100000000 50 25MPI Command: Dataset: Run Directory: /home/fmusial/KMEANS_BenchmarksOMP_PROC_BIND: closeOMP_PLACES: coresOMP_NUM_THREADS: 32
Run run_64_threads	Number processes: 1Number nodes: 1Run Command: <executable> kmeans/input/100000000.in 1000 100000000 50 25MPI Command: Dataset: Run Directory: /home/fmusial/KMEANS_BenchmarksOMP_PROC_BIND: closeOMP_PLACES: coresOMP_NUM_THREADS: 64

(run_1_thread) Efficiency	(run_1_thread) Potential Speed-Up (%)	(run_2_threads) Efficiency	(run_2_threads) Potential Speed-Up (%)	(run_4_threads) Efficiency	(run_4_threads) Potential Speed-Up (%)	(run_8_threads) Efficiency	(run_8_threads) Potential Speed-Up (%)	(run_16_threads) Efficiency	(run_16_threads) Potential Speed-Up (%)	(run_32_threads) Efficiency	(run_32_threads) Potential Speed-Up (%)	(run_64_threads) Efficiency	(run_64_threads) Potential Speed-Up (%)
1	0	0.75	0	0.16	0.06	0.05	0.21	0.02	0.61	0	2.47	0.01	0.74

Speed-Up and Efficiency

▶Detailed Speed-Up and Efficiency

Run	Number of threads	Efficiency (ideal is 1)	Speedup	Ideal Speedup	Time (s)	Coverage (%)
run_1_thread	1	1	1	1	0.014999998733401	0.012340093031526
run_2_threads	2	0.75	1.5	2	0.00999999884516	0.016285981982946
run_4_threads	4	0.16	0.63	4	0.029999997466803	0.075948342680931
run_8_threads	8	0.05	0.41	8	0.070000000298023	0.2254746556282
run_16_threads	15	0.02	0.3	16	0.084999985992908	0.61957377195358
run_32_threads	31	0	0.14	32	0.19999995827675	2.4840588569641
run_64_threads	64	0.01	0.76	64	0.07999999076128	0.75180226564407

Report Configuration

Code clean check

Workaround

Vectorization

Details

Workaround

Slow data structures access

Details

Workaround

Matching between your loop (in the source code) and the binary loop

Arithmetic intensity

General properties

Front-end

Back-end

Cycles summary

Vectorization ratios

Vector efficiency ratios

Cycles and memory resources usage

Front-end bottlenecks

ASM code

Code clean check

Workaround

Vectorization

Details

Workaround

Slow data structures access

Details

Workaround

Matching between your loop (in the source code) and the binary loop

Arithmetic intensity

General properties

Front-end

Back-end

Cycles summary

Vectorization ratios

Vector efficiency ratios

Cycles and memory resources usage

Front-end bottlenecks

ASM code

▶Scalability Runs Description

▼Columns Filter

Speed-Up and Efficiency

▶Detailed Speed-Up and Efficiency